Healthy and happy bathing in and around Berlin

Cooling off with a dip in a local lake or river is one of the great joys of summer – as long as any wastewater discharged there has been properly cleaned. The huge task of treating the wastewater of the German capital, Berlin, falls to Berliner Wasserbetriebe. When the company needed a quick, safe, and effective fix for the summertime wastewater disinfection shortfall at its biggest treatment plant, it turned to Kemira.
Berlin skyline with Spree river at sunset.

Berliner Wasserbetriebe in numbers

690,000

m³ of wastewater treated each day

9,700+

km of piping in sewer network

6

treatment plants

Berliner Wasserbetriebe (BWB) is the largest water supply and wastewater treatment company in Germany. The company supplies drinking water to 3.7 million citizens of Berlin and handles the treatment of wastewater both for Berlin and 500,000 people in the surrounding region. BWB’s sewage treatment plants process approximately 690,000 m3 of wastewater each day.

Making sure every drop is clean

From April through to September, part of the wastewater generated every day in Berlin is discharged close to a nearby bathing area, meaning it must be disinfected to very high standards to comply with the EU bathing water directive. This disinfection takes place at the Berlin-Ruhleben treatment plant in the city’s Spandau borough, which is the largest of the company’s six wastewater treatment plants. Wastewater disinfection at the plant is carried out through UV-light technology. This disrupts the DNA in micro-organisms such as bacteria, viruses, and molds, destroying them.

“We were facing a shortfall of about 500l/second with our disinfection capacity at Berlin-Ruhleben during the summer months,” explains the customer contact from BWB. “We had problems with the pressure in the discharge pipe, which goes 18 km to the south of the city, meaning we could not channel all the wastewater through the pipe as we normally would.”

Because the wastewater is discharged close to recreational bathing areas, BWB needed to find a solution that was both highly effective and quick to implement so that the plant could continue to operate at full capacity. “The other challenge for us is that because we’re located in the city center we have limited space and no room to add more equipment that would take up a large footprint within the plant area,” the customer explains. “We needed a solution that was compact and easy to implement without making any major infrastructure changes.” That’s where the discussion with Kemira about the KemConnect DEX solution started.

BWB needed to find a solution that was both highly effective and quick to implement so that the plant could continue to operate at full capacity.

Safe, sustainable, and cost-effective disinfection

KemConnect DEX uses performic acid (PFA), a powerful biocide that is quick to degrade and leaves no unwanted by-products. The solution includes application support, chemicals delivery, and supply and installation of dosing equipment, as well as controlling and monitoring tools.

“The lab-scale trials proved that KemConnect DEX was very effective. It was also fast – the disinfection process was finished after just four to five minutes – and quick and simple to integrate into our process,” explains the customer.

“It provides a very quick disinfection process exactly when we need it for a relatively low investment. The support and expertise from Kemira has been important in helping us to make sure we can fulfill our disinfection needs and continue to meet the quality requirements for our wastewater discharge. And this in turn means that Berlin’s residents can continue to escape the summer heat with some refreshing outdoor bathing,” the customer concludes.

You might also be interested in

A person using a tablet computer.

Want to get stories like this and more?